Briefly Description of Feed Of The Arm Machine ?

FEED OF THE ARM MACHINE:

This machine is largely used for attaching sleeves and for making complex circular stitches while attaching different parts of the garment

PARTS OF MACHINE

PARTS NAME –

1. Machine pulley
2 Front cover
3Presser foot
4. Needle bar
5.Upper thread guide
6. Lapper
 
SAFETY DEVICE –

1.Thread Take up cover
2.Finger guard
3.Pulley Cover



TECHNICAL ADJUSTMENT OF FEED OF THE ARM MACHINE

Technical adjustments which are to be taught while dealing with Feed of Arm machines are given below. Trainers should keep the following points in mind during the session of Feed of arm machine

1. First demonstrate the adjustment then ask trainee to practice on the machine.
2. Use the Instructional manual given by the machinery supplier during Session
3. Make sure, all the trainees are able to understand the Instructional manual.
4. Practice of sewing on machine is also necessary.
 
Technical adjustments of Feed of arm machine
machine –

1. Basic Machine Practice
2. Technical Specification
3. Installation of needle
4. Needle bar Height adjustment
5. Main looper timing
6. Puller adjustment
7. Needle Guard Adjustment
8. Looper Guard adjustment
9. Feed Dog height adjustment
10. Stitch Length Adjustment (Threading adjustment)