Diagnosis of Bundle Handling:
This is done when the single cycle efficiency of the operator of the operation is low. Bundles should be determined as shown in Table 1.
Process:
1. To detect a bundle, a stop watch and arrangement are required.
2. Enter the required descriptive data (IE, operator, operation, instructor, etc.).
3. Determine the SAMs for the number of units in the bundle.
4. Measure the time for each activity of the operator and enter in the appropriate section in the format.
5. After completing the bundle, calculate the bundle efficiency, single cycle efficiency and compare with SAM.
Key points for determining bundles :
1. Do not interfere with the operator's work
2. Be alert and avoid any obstacles
3. Write everything down
4. Analyze the data and derive your conclusions
It is equally important that the conclusions obtained translate into specific actions that can be taken to improve operator performance. Identify the bundle and give your comments clearly (Seminar SCT,2010).
Name - Rani
Operation - Top stitch armhole
SAM - 0.721
Type of Machine Used – Single Needle Lock Stitch
SC @100 = 0.624
0 Comments